Focus on the sleeves!

Send

Today they play solo! For this, any contrasting material is suitable: knitwear, fur or tweed.

ENGLISH STYLE
Double-breasted blazer comes with sleeves in a cage.

YOU NEED: a blazer. Tweed 140 cm wide, 70 cm long, threads for sewing.
HOW TO MAKE: On the blazer sleeves, mark the joints of the shoulder and side seams with a basting stitch. To turn out a blazer with a lining outside. On the lining of the sleeve, open a pointed hole in the seam. Turn the inside of the blazer out through this hole. Loosen the lining on the bottom edges of the blazer. Then tear off the sleeves from the blazer (at an angle).
On one of the sleeves, unfasten the hem and open the seams of the sleeve. The details of the sleeves should be ironed smoothly and used as a pattern. Fold the tweed in half with its face inward. To chop and cut out the details of the sleeves, transfer the marks on the details of the old sleeves to new ones. Fill seams, iron allowances. Iron the hem of the bottom to the inside, sew it by hand. To turn out sleeves and to sew in an armhole, slightly fitting on an okat.
The blazer is again turned out. Pull the sleeves from the lining fabric inside out to the inside on the blazer, sew manually to the allowances for hemming the bottom. Lining up the lined hole.
In short!
Knitted suede? Why not…

YOU NEED: pullover with short sleeves, artificial or natural suede size. OK. 40 x 50 cm, silk paper, threads for sewing.
HOW TO MAKE: tear off the sleeves from the pullover, open the seams of the sleeves. Iron the details of the sleeves and place the front side on the wrong side of the suede. Cut the sleeves out of suede, 1.5 cm longer on the lower edge. Stitch the details at the hem and lateral seams to the edge, wrap the lower edges of suede around the pullover sleeves on the wrong side and sew them by hand. Stitch at a distance of about 4 cm from the bottom edge.
Stitch the seams of the sleeves, sew the sleeves in the armholes, laying small folds along the okata.WINTER OPTION
In such a pullover you will be doubly warm and comfortable.

And so on the sleeves of the pullover overlays appear
YOU WILL NEED:
wool pullover, faux fur size. OK. 50 x 50 cm, phantom pencil, gear, silk paper, scissors, pins, needle, thread.
STEP 1
Put the folded paper under the sleeve, aligning the fold with its top edge. Contours n
STEP 2
Cut out a piece of paper from the marking and expand it - this is a lining pattern. Lay it on the wrong side of the fur.
STEP 3
Cut two patch parts from the fur. Pin them on the sleeves and sew them by hand.