Fashion Trend: Baby Collar

Send

The naive baby collar is back in fashion. But this time, as a stylish accessory!

WHITE COLLAR WITH FESTONS
Rockers have a rest: on a leather collar an elegant openwork pattern.

YOU NEED: blouseon, thin nappa leather, size. OK. 30 x 35 cm, non-woven G 785, finished oblique collar 2 cm wide, approx. 40 cm, hole punch, magic crayon or marker with fading paint, silk paper, sewing thread.
HOW TO MAKE: copy the collar detail (see slide show) and place it on the front end cut-out, if necessary, adjust the inner edge of the collar to the top front cut-out. Cut 2 parts out of leather (in the mirror image). Continue along the outer sections of the pattern to continue the arched lines (magical with a chalk or marker with disappearing paint). Cut the resulting arcs.
Strengthen the collar details from the inside with a non-woven fabric, not reaching 1 cm to the outer edge. Mark lines of lines, as shown in the pattern, with a magic crayon or marker, sew with a dense narrow zigzag. Mark holes on the collar details, on the outer edges of the dia. OK. 2 mm, next to the lines of lines to dia. OK. 4 mm. Punch holes. Fold the oblique in half along the length, lay along the outer edges of the collar and pin, while the front edges of the collar are 1 cm apart. To sew a slanting inlay, seealso step-by-step instructions for the last photo, while tucking the ends of the inlay at the rear ends of the collar. Place the collar on the cutout of the front of the top, wrap the edging inwards and sew on.

COLLAR EMBROIDERED BY BEADS
It takes time and patience to sew so many pearls!
YOU NEED: Batiste size. OK. 30 x 50 cm, non-woven flizofiks, finished oblique inlay 2 cm wide, 50 cm long, beads of various sizes, suitable in color. Silk paper, threads for sewing.
HOW TO MAKE: copy the detail for the collar (see slide show), cut out 4 details of the collar. Iron 2-piece collar on 2 collar parts. Fold the oblique in half lengthwise, lay around the outer edges of the collar and pin it, while the front edges of the collar should be 1 cm apart, at one end of the collar leave the oblique protruding for a length of approx. 3 cm. To sew a slanting inlay; see also step-by-step instructions below.

Sew beads in rows on collar details. Cut the outer sections of the collar close to the beads. Finally, wrap the oblique inlet onto the inside of the collar and sew it by hand, while grabbing the protruding end of the inlay, turning it in. Sew a large bead instead of a button on this end of the hem. Make a thread loop at the other end of the border.

BERTHA
A snow-white girl's dream of silk organza and delicate lace will decorate any dress.

You will need:
Organza Size 30 x 60 cm, non-woven G 785, 2 different bands approx. 2 cm, 60 cm long, finished oblique inlay 2 cm wide, 1.30 m long, silk paper, sewing threads.

Step 1
Copy the collar part (see slide show). Collar details cut out. Note: parts already contain 1 cm of allowances. In addition, cut 3 details from organza for a ruffle 2 cm wide and 30 cm long. Cut the lace braid into 2 identical parts, sew the collar as described below, stitch the protruding ends of the oblique for ties.
Cut 4 halves of collar from organza and pads. Details duplicate gasket. Fold the collar halves in pairs and grind cleanly along the outer contour.

Step 2
Fold the oblique tape in half lengthwise. Insert the halves of the collar between the halves of the oblique tape with an interval of 1 cm, pin and sew, leaving the ties of the same length.
Shag 3
Pieces of measured lace to pick along one edge, and pieces of tape from organza - along the midline. Pin the lace and organza and sew it alternately to the halves of the collar.
Photo: Jan Schmiedel (7), Stefan Knauer (3). Production: Teresa Bahler.
Material prepared by Elena Karpova

Send